Viewing a thread

You are logged in as a guest. ( logon | register )

At random: More decorations for valor have been awarded, per man, to the submarine service than any other Navy Branch.

mechanical diving alarm Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page]
Forums-> Serious Submarine Research	Message format

freeman

Posted 2009-07-30 7:37 PM (#29191)

Subject: mechanical diving alarm

I'm looking for information on the older mechanical diving alarm. This one was used on the Permit era boats in the 60's and 70's. I would like to find the electrical diagram/specs for the actuator windings, or the manufacturer.

Stamped into the metal is an F within a circle with what appears to be a lightening bolt.

crystal

Posted 2009-08-20 10:39 AM (#29872 - in reply to #29191)

Master and Commander

Posts: 2191

Location: Port Ludlow, WA (the Olympic Penninsula)

Subject: RE: mechanical diving alarm

Joe, these "older" diving alarms (a.k.a. klaxons) used a motor actuated diaphram (via a cog) for the vibration (sound) produced. They are/were made "mostly" by Federal Signals (probably same as your logo)... They were still making them several years back for a price tag around $1,300.00 - Hope this helps answer you question...

Jump to page : 1
Now viewing page 1 [25 messages per page]

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software